Kodak Carousel slide projector repairs at MCVR

Kodak Carousel slide projector repairs:

Older series Carousel Projectors (600-860 and most Ektagraphic models)

We can repair most of the older Carousel series projectors, as long as the main motor does not need to be replaced.  The main motors for these units are no longer available.  To test the main motor, let the projector run for about 45 minutes and listen to the motor sound.  If the motor makes a scraping sound or begins to slow down, the bearings are worn and the projector is not repairable.

These machines were manufactured using a plastic material that becomes brittle with age.  That material was used for the link that activates the machine when the forward and reverse buttons are pressed, as well as for the gears on the focus motor and the focus shaft.  We replace all these parts (if present) when we overhaul these projectors.  We also have most other parts that are commonly needed for repair.

The estimate for an overhaul is:

• $100 for models that have manual focus only
• $120 for models power focus (operated from the remote)
• $140 for models that have autofocus
• $150 for the Custom series models

We recommend <CALLING OR SENDING AN EMAIL> before sending Carousel projectors, especially if you are having problems with the autofocus.  We can repair some autofocus problems, but the parts supply is quite limited.

Newer series Carousel slide projectors

Most repairs are between $90 and $120, as long as the main motor does not need to be replaced.  These motor are available, but increase the repair cost to over $150.  Motor replacement is rarely needed unless the machine has had very heavy use.

The return shipping charge for slide projectors is usually $12-15.

We no longer repair Bell and Howell, Airequipt, Sawyers, or any other slide projectors other than the Kodak Carousel series. We also do not repair the Carousel 500, 550, or 110 models.

These estimates are pre-approved prices. They are usually accurate, as long as the listed repair is the only service needed.  Please attach a note to the camera describing the problem and approving the listed estimate.  We will NOT exceed that amount without notifying you first. This will reduce the repair time.  If we find other problems with the camera or need to change the estimate, we will notify you.  The prices listed do not include the return shipping charge.

<Click here> for a printable repair request form  and optional mailing label

<Click here>  for detailed information on shipping your camera and our return shipping rates and policies

We recommend contacting us before sending cameras for repair, especially if your camera is more than eight years old.